Inspection and check of work equipment

We are responsible for controlling the operation of work equipment within the time limits set by the manufacturer's regulations and standards

Zaštita Beograd performs a complete inspection and check of work equipment in accordance with the authorization with the competent Ministry by decision number 164-02-00305 / 2015-01 from 11.04.2016. years.

We are responsible for controlling the operation of work equipment within the period set by the regulations and standards of the manufacturer, which takes place over a period of three years. Also, for regular annual inspection of temporary electrical installation with devices, equipment and accessories, our team comes to the address and performs periodic inspections.

The goal of preventive inspection of work equipment

Before starting to use new equipment, that is, before putting into use those equipment that has undergone a modification or breakdown, a preventive inspection and checking of work instruments is required. Also, after any relocation of the equipment, its functionality is checked.

In this way, it is determined whether the equipment is completely safe and harmless to the health of the workers themselves. All established technical regulations, standards and instructions of the manufacturer must be complied with for the sake of legal obligation, but above all, for the safety of all employees.

A comprehensive list of work equipment subject to these inspections can be found here.

Licensed team for accurate and reliable professional findings

As a result of the examination, an expert report was obtained with the signature of our licensed team. The content of this finding, among other things, includes all data on individual elements of work equipment and their condition, as well as the final conclusion that proves the possibility or unsuitability to perform tasks on it.

One of the items from the findings is informing about the devices that were used to check the work equipment. Our instruments, with which we perform all analyzes, meet the highest standards and, therefore, guarantee absolutely accurate data.

Zaštita "Beograd" - always with you for absolute safety at work

Our highly qualified team with many years of experience is here to provide you with a complete professional inspection and assessment of work equipment while respecting all legal regulations, which directly allows you to do business responsibly and control the safety of the workplace.

For more information, our employees are always at your disposal. Contact us by phone or write to us at office@zastitabeograd.com.

Inspection and verification of equipment is performed on the basis

  • Law on Safety and Occupational Health Službeni glasnik of RS “No. 101/2005, 91/2015 and 113/2017 other law
  • Rulebook on the procedure of inspection and verification of equipment for work and testing of working environment conditions Službeni glasnik of RS “No. 94 / 2006,114 / 2014 and 102/2015);
  • Rulebook on preventive measures for safe and healthy work when using work equipment (“Službeni glasnik of RS” No. 23/2009, 123/2012, 102/2015 and 101/2018).

Deadlines for periodic inspections

Deadlines for periodic inspections and checks of work equipment (Article 8, Rulebook on the procedure for inspection and checks of work equipment and testing of working environment conditions (Službeni Glasnik of RS “No. 94 / 2006,114 / 2014 and 102/2015)) which reads:”

Periodic inspections and checks of work equipment shall be performed within the period determined by technical regulations and standards or determined by the manufacturer’s instructions, and no later than three years from the day of previous inspection and verification, except for periodic inspections and checks of temporary electrical installations with devices. equipment and accessories, which are performed within one year from the day of the previous inspection and check and periodic inspections and checks of work equipment determined by the employer by the act on risk assessment, which are performed within the period determined by that act.

Methods of realization:

Periodic inspections and checks of work equipment shall be performed within the period determined by technical regulations and standards or determined by the manufacturer’s instructions, and no later than three years from the day of previous inspection and check, except for periodic inspections and checks of temporary electrical installations with devices. equipment and accessories, which are performed within one year from the day of the previous inspection and inspection and periodic inspections and inspections of work equipment determined by the employer by the act on risk assessment, which are performed within the period determined by that act. After the inspection and verification, the Expert Finding is issued “

Inspection and verification of equipment is performed on the basis

dizalica i uređaj nosivosti od 0,5 tona i više, kao i privremeno postavljena konzolna dizalica i vitlo nosivosti od 0,5 tone i više, na mehanizovani pogon, koji služe za dizanje, spuštanje i prenošenje tereta pomoću čeličnog ili drugog užeta, lanca, hidraulika i dr.;

regalna dizalica na mehanizovani pogon (u regalnom hodniku i van njega, vezana za šine ili koja ima na drugi način automatski regulisane pozicije) koja služi za unošenje u regal i uzimanje iz regala paleta ili materijala;

podizna platforma na mehanizovani pogon koja, pomoću ugrađene platforme ili korpe, služi za dizanje i spuštanje zaposlenih radi obavljanja radnih operacija;

viseća skela, na mehanizovani pogon, koja na vertikalnim površinama zgrada, na fasadama zgrada, gradilištima i u objektima namenjenim za radne i pomoćne prostorije služi za dizanje i spuštanje zaposlenih i materijala

samohodno vozilo, na mehanizovani pogon, koje se koristi za unutrašnji transport – vuču, potiskivanje, dizanje, spuštanje i prenošenje tereta;

presa, makaze, nož i valjak, na mehanizovani pogon koji su fiksno postavljeni, za sečenje, presovanje, savijanje i izvlačenje materijala, a u koje se materijal za obradu ulaže ili vadi ručno;

oprema za preradu i obradu drveta, plastičnih i sličnih materijala, na mehanizovani pogon, koja je fiksno postavljena, u koju se materijal za obradu ulaže ili vadi ručno;

uređaji u kojima se nanose i suše premazna sredstva čije komponente u dodiru sa vazduhom obrazuju zapaljive i eksplozivne smeše, isparenja i hemijske štetnosti opasne po zdravlje zaposlenih;

oprema, odnosno postrojenja za proizvodnju, punjenje, merenje i kontrolu, sa cevovodima za napajanje, razvođenje i transport eksplozivnih, otrovnih i zagušljivih fluida – gasova ili tečnosti, osim prirodnog gasa (zemni gas), u objektima koji se koriste kao radni i pomoćni prostor;

protiveksplozijsko zaštićena oprema za rad, koja se koristi u tehnološkim procesima;

privremena električna instalacija sa uređajima, opremom i priborom, postavljena za vreme izgradnje građevinskih objekata ili izvođenja drugih radova;

oprema za rad (mašine, uređaji, postrojenja, instalacije i alati) za koju je poslodavac aktom o proceni rizika utvrdio da se na njoj vrše preventivni i periodični pregledi i provere.

Preglede i provere opreme za rad vrši pravno lice sa licencom za obavljanje poslova pregleda i provere opreme za rad, koje poseduje odgovarajuće instrumente i uređaje za vršenje pregleda i provere, navedene sa tehničkim karakteristikama u prihvaćenoj metodologiji.

O izvršenom pregledu i proveri opreme za rad izdaje se stručni nalaz.

Uz stručni nalaz pravno lice koje je obavilo preglede i provere opreme za rad prilaže kopiju licence tog pravnog lica i odgovornog lica koje je potpisalo stručni nalaz.

Inspection and check of work equipment

Your questions - our answers

Through many years of experience working with clients from various fields and industries, we have gained a knowledge base on the most common issues of our clients and this area.